SMOGtec

Dust and smoke

Choose performance:

A solution designed specifically to remove smog from the air. Designed for treating air supplied to housing and utility facilities.

CONFIGURE YOUR DEVICE ASK ABOUT A PRODUCT

Description

A solution designed specifically to remove smog from the air supplied to housing and utility facilities.

Ever more stringent air purity standards and a conscious need to live in neutral environment have become a challenge for us. This contributed to designing a series of devices filtering airborne solid tar particles from the air.

National and European air purity standards force manufacturers and users of solid fuel boilers to increase their awareness concerning the emission of harmful substances into the atmosphere. Whereas modern boilers are fitted with technology that secures high performance and low-emission operation, the majority of buildings and households are still using old combustion technologies.

This results in emissions of huge amounts of harmful substances into the atmosphere, especially during the heating period. The smog appearing over the majority of Polish cities and towns is a scourge to their inhabitants.

Purpose

We are all exposed to inhaling harmful substances. Even those living in modern buildings are not free from this threat.

New buildings are fitted with artificial ventilation systems featuring heat recovery. In most cases, air filters used in air handling units and recuperators only provide G4 or M5 filtration class, which only protects against larger solid particles – above PM15. Finer particles easily penetrate into our homes, flats and bodies. The impact of dust on living organisms is nothing but negative.

SMOGtec was designed specifically for operation with THERMOtec filtration modules and devices, i.e. ALERtec, ODORtec, BYpass, INlet, OUTlet.

SMOGtec is an electrostatic air filtration module that ensures filtration of solid particles up to PM1, mainly those originating from combustion.

Technical Data

SMOGtec is available in the ranges shown in the table below. Model variety is the consequence of the air flow they are able to process.

Model	Air flow	Power supply	Power consumption	Flow resistance	Device dimensions
Model	m³/h	V AC	W	Pa	(W) x (H) x (L) mm
Compact R	0-400	230	65	50	390x390x396
6.0	400-800	230	60	45	608x529x375
10.0	800-1200	230	60	55	795x682x375
16.0	1200-2000	230	90	60	1480x682x375

Equipment Configurations

SMOGtec Compact R

A filtering device designed to remove smog and smoke from the air.

Filtering of PM2.5 grade particles by means of an electrostatic filter.
The Compact R Series is designed for installation in existing ventilation systems on supply ducts directly upstream of the recuperator.

Designed for operation with an efficiency of up to 400 m3/h.

Through its negligible flow resistance, the device does not require an additional fan.

BYpass + SMOGtec

A filtering device designed to remove smog and smoke from the air.

Filtering of PM2.5 grade particles by means of an electrostatic filter.

6.0 Series and above is designed for installation in existing ventilation systems on supply ducts directly upstream of the recuperator.

Designed for operation with an efficiency ranging from 400 m3/h to 2000 m3/h.

Modular design facilitates installation and selection of the required range.

Through its negligible flow resistance, the device does not require an additional fan.

BYpass + SMOGtec + ODORtec + FANtec

A filtering device designed to remove smoke and smog from the air.

Filtering of PM2.5 grade particles by means of a SMOGtec electrostatic filter.

ODORtec activated carbon inserts ensure odor reduction.

Air delivery and stream flow adjustment rely on the FANtec module.

Built-in solid particles and pressure sensors monitor the quality of air at the device inlet and outlet, as well as the condition of individual filtration sections.

A BYpass directs the air between the filtration section and the free flow chamber.

BYpass + ALERtec + SMOGtec + FANtec

A filtering device designed to remove airborne allergens and smog from the air.

Filtration of PM2.5 grade particles through a 3-stage selection process ensured by the ALERtec module.

Smog and smoke are removed by the electrostatic SMOGtec filter.

Air delivery and stream flow adjustment rely on the FANtec module.

Filter condition and optimal operational adjustment to match the current conditions rely on an automation system fitted with solid particles sensors and pressure transducers.

A BYpass directs the air between the filtration section and the free flow chamber.

Installation

Below is a sample application diagram for the SMOGtec fan filter unit with a typical recuperator.

Documents for download

Name document

File size

Download

Karta Katologowa - SMOGtec

628 KB

Download document